AT&T Cell Phones | Blog about att phones.

First to do this, please make sure you had a useless phone, then click here to download the AT&T Samsung Eternity Firmware, some users had tested the steps below, it works well, didn’t lose any of settings or data. we can’t guarantee that this method will work with all bricking problems, thanks the unoffical Samsung Eternity’s forum offers the solutions below: AT&T Samsung Eternity info

Samsung Eternity Partial Firmware Flash (keeps settings, contacts, data, etc.)

Things you will need:
1. Samsung USB Data cable.
2.Multiloader v5.5 which can be downloaded by the attachment below…..(Thank you Berdman21 !!)

Steps:
1. Put your bricked phone in bootloader mode by holding down the red power button and the down volume button at the same time until the screen pops up.
2. Open up Multiloader v5.5 and under the “control” box, select “MSM6275/MSM6280/MSM6290″
(Read the article)

Comments(0)

The firmware is a zip file for Samsung Eternity, you can download the AT&T Samsung Eternity Firmware from 4shared for free! We are sorry for all Samsung Eternity users, We lost this useful firmware software, it had uploaded on 2009-07-2. Now we share the firmware, if you have not upgrade your Eternity, you can download and upgrade it by yourself now!

AT&T Samsung Eternity info - Samsung Eternity a867 free firmware download

A867UCHJ3.zip

NOTE:You can download the unzip software here.

Comments(0)

It seems lots of AT&T Samsung Eternity user had meed this very important issue, check the following threads, all threads on the same subject about AT&T Samsung Eternity a867, When i make a call to my friend, having multiple callers complain that they couldn’t hear me. We are glad to found the solutions for this problem, the method worked perfectly and I now love the phone and have zero complaints about the Eternity. I think this method is important enough to warrant a sticky either in the How To or Hacks/Tricks sections.AT&T Samsung Eternity info

To repeat se4rohan’s post (for the sake of the mod who might hopefully make a new thread for the sticky)…

*#197328640# -> [8] Audio -> [1] RCV Config -> [3] Call Config -> [3] RCV Codec Gain

Existing Values
===========
1.txvol: 3 dB
2.dtmf_tx: -21 dB
3.cod_tx: 1 dB
4.cod_rx: 5 dB
5.cod)st: -84 dB
6.whisper_TxVol: 10
(Read the article)

Comments(0)