AT&T Cell Phones | Blog about att phones.

The firmware is a zip file for Samsung Eternity, you can download the AT&T Samsung Eternity Firmware from 4shared for free! We are sorry for all Samsung Eternity users, We lost this useful firmware software, it had uploaded on 2009-07-2. Now we share the firmware, if you have not upgrade your Eternity, you can download and upgrade it by yourself now!

AT&T Samsung Eternity info - Samsung Eternity a867 free firmware download

A867UCHJ3.zip

NOTE:You can download the unzip software here.

Comments(0)

It seems lots of AT&T Samsung Eternity user had meed this very important issue, check the following threads, all threads on the same subject about AT&T Samsung Eternity a867, When i make a call to my friend, having multiple callers complain that they couldn’t hear me. We are glad to found the solutions for this problem, the method worked perfectly and I now love the phone and have zero complaints about the Eternity. I think this method is important enough to warrant a sticky either in the How To or Hacks/Tricks sections.AT&T Samsung Eternity info

To repeat se4rohan’s post (for the sake of the mod who might hopefully make a new thread for the sticky)…

*#197328640# -> [8] Audio -> [1] RCV Config -> [3] Call Config -> [3] RCV Codec Gain

Existing Values
===========
1.txvol: 3 dB
2.dtmf_tx: -21 dB
3.cod_tx: 1 dB
4.cod_rx: 5 dB
5.cod)st: -84 dB
6.whisper_TxVol: 10
(Read the article)

Comments(0)

Some users have bricked AT&T Samsung Eternity!Here is a tricks to teach you reflash your phone with the firmware. First please make sure you had downloaded AT&T Samsung Eternity firmware and a samsung USB Data cable. I found this Samsung Eternity Hacks and Tricks from Samsung Eternity forum,if you can’t download the software or apps,please register as a member first!AT&T Samsung Eternity info

AT&T Cell Phones Faq - How to fix a Bricked AT&T Samsung Eternity?

Things you will need:
1. Your “thought to be” useless phone!
2. Multiloader v5.5 which can be downloaded by the attachment below…..(Thank you Berdman21 !!)

Steps:
1. Put your bricked phone in bootloader mode by holding down the red power button and the down volume button at the same time until the screen pops up.
2. Open up Multiloader v5.5 and under the “control” box, select “MSM6275/MSM6280/MSM6290″
3. Plug your USB Data cable into your phone and into your computer (at this point port numbers should show up at the very bottom and the Download button should be highlighted)
4. Leave the boxes labeled, ” Boot Change, Full Download, Master Rom and Differences Only,” unchecked.
(Read the article)

Comments(0)