AT&T Cell Phones | Blog about att phones.

Want to put/install softwares or applications on your AT&T HTC Tilt 2?you can install them as same as AT&T HTC Touch Pro2.In general there are three steps about how to install apps.At first please make sure you had got a USB cable,then check the following steps:AT&T HTC Tilt 2 info

NOTE:You can safely delete the .cab file from your device, if you are short on storage. Personally, I created a folder on my storage card “Cabs” from which I can quickly install all my applications, in case of a hard-reset in the future.

# Download the file to your PC.

1.If it ends in .zip or .rar:
# extract them (winrar)

2.If the file ends in .exe:
# connect your device to the PC via USB cable to Active Sync;
# Double click the .exe file;
# Installation will begin. Follow onscreen PC instructions.
# Finish installation on your device by selecting where you want to install the file (device/storage) and tap “install”;
# click OK and soft-reset your device - done!
(Read the article)

Comments(0)

The AT&T HTC Tilt 2 user want to download more songs/mp3 ringtones,it seems has a trouble to downloading 50 or more songs(AT&T HTC Tilt 2 mp3 ringtones)to your handheld from your PC, the connection to your handheld may timeout,here is a tutorial teach your how to bypass this.

method:

To bypass this, select the Settings Tab > All Settings > Connections > USB to PC. Check the box for “Enable advanced Network Functionality”. Select OK. You will want to unclick this box if you are getting corporate email, as it may cause issues with VPNs and servers.

Alternately, you also have the option to set your device to “Disk Drive” mode (for faster file transfer) by going to the Settings Tab > All Settings > Connections > USB to PC and selecting Disk Drive. Note: The storage card won’t be displayed in the devices File Explorer when connected to a PC in Disk Drive mode.

So great AT&T HTC Tilt 2 tutorial,very useful!
via

Comments(0)

An new Htc Tilt 2 trouble is here,when you installed Activesync on your computer,but the Activesync is not recognizing your AT&T Htc Tilt 2 device,many users don’t know what should to do,today we found the Solutions finally,In fact, HTC’s official Web site has announced the method.AT&T HTC Tilt 2 info

AT&T Cell Phones Faq - How to make the Activesync to recognizing your AT&T Htc Tilt 2?

Be sure that you have not connected your device to your PC before you installed Activesync. If you did plug in your device before installing, uninstall Activesync and start the process over ensuring that you do not plug your device in until after Activesync has been installed. If using Windows Vista, the same applies for Windows Mobile Device Center (WMDC).

Verify that your device is recognized by your PC in the Device Manager; if it is not, resolve that issue first.

Verify you are using the USB cable supplied with your device.

Unplug your device from the PC for a few seconds and then plug it back in.

Perform a Soft reset on the device while it is plugged into the PC.

On the device, go to Start > Settings > All Settings > Connections > USB to PC and uncheck the Enable faster data synchronization box.

Thanks for reading,hope this helpful!Source

Comments(0)