AT&T Samsung Eternity Hacks and Tricks:Samsung Eternity Partial Firmware Flash
First to do this, please make sure you had a useless phone, then click here to download the AT&T Samsung Eternity Firmware, some users had tested the steps below, it works well, didn’t lose any of settings or data. we can’t guarantee that this method will work with all bricking problems, thanks the unoffical Samsung Eternity’s forum offers the solutions below: AT&T Samsung Eternity info
Samsung Eternity Partial Firmware Flash (keeps settings, contacts, data, etc.)
Things you will need:
1. Samsung USB Data cable.
2.Multiloader v5.5 which can be downloaded by the attachment below…..(Thank you Berdman21 !!)
Steps:
1. Put your bricked phone in bootloader mode by holding down the red power button and the down volume button at the same time until the screen pops up.
2. Open up Multiloader v5.5 and under the “control” box, select “MSM6275/MSM6280/MSM6290″
3. Plug your USB Data cable into your phone and into your computer (at this point port numbers should show up at the very bottom and the Download button should be highlighted, if not, do a “Port Search.”)
4. DON’T check any of the boxes above that say, Boot Change, Full Download, etc…. Boot and Apps should be the only tabs not highlighted below.
5. Click on the “Amss” button and locate the Amss.bin folder and then click open.
6. Click the “Rsrc1″ button and locate the Rsrc.rc1 file and then open.
7. Click the “Rsrc2″ button and locate the Rsrc.rc2 file and then open.
8. Click Download and the phone will then be reflashed. ( don’t disconnect the cable until it tells you it is completed and the phone restarts.)
After the restart your phone should have all your personal data and settings the same………..if your phone is NOT fixed however, follow these steps for a FULL firmware flash……. here
NOTE: If you have some problems or want to learn more about this AT&T Samsung Eternity Hacks and Tricks, click here.
